We utilize local resources to collect and recycle scrap copper and other metal waste, then mechanically separate, clean, and coil it into rolls.

Hot-dip galvanized steel sheet. The thin steel sheet is immersed in a molten zinc tank to make a layer of zinc thin steel sheet adhered to its surface. It is mainly produced by continuous galvanizing process, that is, the rolled steel sheet is continuously immersed in a plating tank with molten zinc to make a galvanized steel sheet;
Electro-galvanized steel sheet. This galvanized steel sheet made by electroplating has good processability. But the coating is thin and the corrosion resistance is not as good as hot-dip galvanized sheet;

Galvanized coil, the thin steel sheet is immersed in a molten zinc tank to make a layer of zinc thin steel sheet adhered to its surface.
It is mainly produced by continuous galvanizing process, that is, the rolled steel sheet is continuously immersed in a plating tank with molten zinc to make a galvanized steel sheet; alloyed galvanized steel sheet. This steel sheet is also made by hot dip method, but after leaving the tank, it is immediately heated to about 500℃ to form an alloy film of zinc and iron. This galvanized coil has good coating adhesion and weldability.

Galvalume coil is a kind of aluminum-plated zinc alloy treatment method to form a coil with high strength, excellent corrosion resistance and beautiful appearance on the surface of steel, with high corrosion resistance and air pollution resistance. Galvalume coil also has good surface decoration, and can be processed into a variety of beautiful building and home appliance materials.

Hot-dip galvanized steel sheet. The thin steel sheet is immersed in a molten zinc tank to make a layer of zinc thin steel sheet adhered to its surface. It is mainly produced by continuous galvanizing process, that is, the rolled steel sheet is continuously immersed in a plating tank with molten zinc to make a galvanized steel sheet;
Electro-galvanized steel sheet. This galvanized steel sheet made by electroplating has good processability. But the coating is thin and the corrosion resistance is not as good as hot-dip galvanized sheet;

Galvalume coil is a kind of aluminum-plated zinc alloy treatment method to form a coil with high strength, excellent corrosion resistance and beautiful appearance on the surface of steel, with high corrosion resistance and air pollution resistance. Galvalume coil also has good surface decoration, and can be processed into a variety of beautiful building and home appliance materials.

Galvanized coil, the thin steel sheet is immersed in a molten zinc tank to make a layer of zinc thin steel sheet adhered to its surface.
It is mainly produced by continuous galvanizing process, that is, the rolled steel sheet is continuously immersed in a plating tank with molten zinc to make a galvanized steel sheet; alloyed galvanized steel sheet. This steel sheet is also made by hot dip method, but after leaving the tank, it is immediately heated to about 500℃ to form an alloy film of zinc and iron. This galvanized coil has good coating adhesion and weldability.

Cold rolled steel coils are often used in the steel industry and are different from hot rolled coils. It refers to a steel strip that is directly rolled into a certain thickness with a roll at room temperature and rolled into a whole roll with a winder. Compared with hot-rolled coils, cold-rolled coils have a brighter surface and higher finish, but generate more internal stress, and are often annealed after cold-rolling.

Carbon steel, on the other hand, has far lower chromium levels, and is instead a carbon-iron alloy with only a few other materials, if any, as part of its makeup. As a result, it can be referred to as ‘low-alloy’ steel. Both stainless steel and carbon steel feature this basic composition, but carbon steel can be defined by its carbon content. This is normally around 2-2.5%, however this often varies. Though susceptible to rust unlike stainless steel, carbon steel is often cheaper and has its own varying mechanical properties based on carbon content.

Thickness: 0.15-600mm
Standard: GB, JIS, DIN, ASTM
Width: ≦2600mm
Temper: O/H111 H112 H116/H321 H12/H22/H32 H14/H24/H34/H16/H26/H36 H18/H28/H38 H114/H194, etc.F, T1 T2 T4 T5 T6 T51 T54 T651 T652 T6510 T62 T6511 ETC
Length: ≦16000mm or Coil (C)
Type: sheet/ plate/coil/roll
Aluminum Grade: 1000 Series: Industrial Pure Aluminum(1050,1050A,1060,1070,1100,); 2000 Series: Aluminum-copper alloys(2024(2A12), LY12, LY11, 2A11, 2A14(LD10), 2017, 2A17); 3000 Series: Aluminum-manganese alloys(3A21, 3003, 3103, 3004, 3005, 3105); 4000 Series: Al-Si alloys(4A03, 4A11, 4A13, 4A17, 4004, 4032, 4043, 4043A, 4047, 4047A); 5000 Series: Al-Mg alloys(5052, 5083,5454, 5754, 5005, 5086,5182, 5A05 5A06); 6000 Series: Aluminum Magnesium Silicon Alloys(6063, 6061, 6060, 6351, 6070, 6181, 6082, 6A02); 7000 Series: Aluminum, Zinc, Magnesium and Copper Alloys(7075, 7A04, 7A09, 7A52, 7A05)

Port: Qingdao,Tianjin,Shanghai
Carbon Steel:API 5L Gr B to Gr X 70 PSL1 and PSL2 X70Q/X80Q/X100Q
ASTM A53 Gr B / A106 Gr B 
Boiler pipe: ASTM A179/A192/A214 C
EN10216 P195GH P235GH P265GH
DIN17175 ST35.8 ST37
ASTM A333 Gr 3 and Gr 6
Alloy Steel: A335 P5/P9/P11/P12/P22/P91/P92
30CrMo4/34CrMo4/4140
OCTG Casing,Tubing, coupling: J55,K55,N80,L80,P110,L80-1Cr/9Cr/13Cr
R95/C90/T95/Q125/V140/V150

Carbon steel, on the other hand, has far lower chromium levels, and is instead a carbon-iron alloy with only a few other materials, if any, as part of its makeup. As a result, it can be referred to as ‘low-alloy’ steel. Both stainless steel and carbon steel feature this basic composition, but carbon steel can be defined by its carbon content. This is normally around 2-2.5%, however this often varies. Though susceptible to rust unlike stainless steel, carbon steel is often cheaper and has its own varying mechanical properties based on carbon content.